1. Keep the sensor outward and uncovered so that it can sense your movement.
Clean the surface before stick the strip. If the glue is not sticky
enough, you can add some double sided tape, fix buckles or mounting
bracket clip to fix it.
Sensing Technology: The strip will light up automatically when its
infrared transducer is activated and turn off 15~20s after you leave.
You can also turn it to ON mode and it will keep lighting whatever in dark or not, flexible to use.
DIY household lights for wardrobe, stairs, hallways and ceilings, etc.
Decorative lights for holidays and exhibitions and buildings.
AAA batteries are required for the white controller (batteries are not
included) Don't look directly to the lights, or it may hurt your eyes.
strip light may still work in manual mode when battery is low, because
it consumes less power in manual mode than in sensing mode)
LED Type: SMD 3528
LED Quantity: 60
Strip Length: 3.28ft / 1m
Input voltage:5 V DC
Color temperature: 3000K~5000K
Motion temperature: -10°~ 50°C
Battery: 4 AAA battery
Control Type: PIR Sensor & Manual Control
Sensor Range: 120 degrees
LED life: 80,000 hours or more
1 x LED strip
1 x Magnetic Strip
1 x Stick-up Strip
1 x User Manual
2 x Mounting Accessories